2018 was a pretty productive year for me. Met some new hobbyist friends who inspired me to do better on my projects. This is a list of the mechs that i've managed to churn out during the year.
March 2018
kitbashed 1/144 HGUC Vervain
April 2018
customer colored 1/144 HGUC Gelgoog with scratchbuilt backpack
May 2018
customer colored 1/144 HGBF A-Z Gundam
June 2018
resin conversion kit 1/144 NG Tallgeese II to Leo
August 2018
kitbashed 1/144 HGBF Leopard Buster
September 2018
kitbashed 1/144 HGBF Gundam G3
October 2018
custom colored 1/144 HG00 Advanced GN-X
1/144 HGUC Dom Tropen Unicorn ver.
November 2018
custom colored 1/144 HGUC Efreet Varangr
December 2018
custom colored 1/144 HGUC Nemo
custom colored 1/144 HGTO Prototype Gouf
Looks like getting even just that cheap airbrush was a pretty good investment after all.
Been itching to work on any mech kit that's not exactly humanoid for a while now. I was playing Mechwarrior 4: Mercenaries a few months ago so a Timber Wolf seemed to be just the thing. Problem is, i haven't seen any Battletech kits at all in local stores for over a decade and a half already. Overseas online stores will drain my wallet if i go for the out-of-print,rare and overpriced Armorcast kits so the only resort i had left was to have one 3D-printed.
The resolution looks good on that print! Sa tingin mo pwede na ang material na yan for the 1/72 AC parts? Kung may access ka sa 3d printing I can share some of the CAD models I am working on in .stl format.
(08-19-2019, 11:01 PM)J.E_Magog Wrote: [ -> ]The resolution looks good on that print! Sa tingin mo pwede na ang material na yan for the 1/72 AC parts? Kung may access ka sa 3d printing I can share some of the CAD models I am working on in .stl format.
Roninfang here on the boards accepts 3d printing commissions.
(08-19-2019, 11:01 PM)J.E_Magog Wrote: [ -> ]The resolution looks good on that print! Sa tingin mo pwede na ang material na yan for the 1/72 AC parts? Kung may access ka sa 3d printing I can share some of the CAD models I am working on in .stl format.
I'd say they're good enough. I shopped around for print shops who did really good work. Had it done by this shop based in Bulacan then just scheduled a meet-up for the finished product. Was pretty cheap too.
Sure. You still got the files for some of those PS2-era parts? ☺
(08-20-2019, 06:56 PM)Fox Wrote: [ -> ]I'd say they're good enough. I shopped around for print shops who did really good work. Had it done by this shop based in Bulacan then just scheduled a meet-up for the finished product. Was pretty cheap too.
Sure. You still got the files for some of those PS2-era parts? ☺
Gonna have to sift through some of my files from 2014. Do the models need to be arranged in a particular manner? The models I have are currently laid out like this since it was printed in SLA.
(08-21-2019, 10:42 AM)J.E_Magog Wrote: [ -> ]Gonna have to sift through some of my files from 2014. Do the models need to be arranged in a particular manner? The models I have are currently laid out like this since it was printed in SLA.
Lemme know if you find any. Hahaha. Not really that much of a priority nowadays kasi iniwan ko yung mga AC kits ko sa Maynila nung pinauwi ako ng Ilocos. I just took painting equipment and pretty much lahat ng mga HGUC ko for company. Hahaha.