+- The Raven Republic Forums (https://ravenrepublic.net/forums)
+-- Forum: Armored Core (https://ravenrepublic.net/forums/forumdisplay.php?fid=57)
+--- Forum: Designs (https://ravenrepublic.net/forums/forumdisplay.php?fid=6)
+---- Forum: 4th Generation (https://ravenrepublic.net/forums/forumdisplay.php?fid=10)
+---- Thread: Abalone - a blader (/showthread.php?tid=1675)
Abalone - a blader - strawhat_luffy - 12-30-2008
Head - HD-LAHIRE
Core - WHITE-GLINT/CORE
Arms - 03-AALIYAH/A
Legs - LG-LAHIRE
FCS - BLUEXS
Gen. - GN-SOBRERO
Main - S04-VIRTUE
Back - B811-LATONA
Side - AB-HOLOFERNES
OB - KRB-SOBRERO
RA - 07-MOONLIGHT
LA - 07-MOONLIGHT
RB - ACB-0710
LB - ACB-0710
Head(top) - 03-AALIYAH/HTS1
Core R/L Upper - 03-AALIYAH/CUS1
Core R/L Lower - 03-AALIYAH/CLS1
Arms - SOLUH-ARMS-1
Legs Back - LG-LAHIRE-OPT02
Legs R/L Upper - 047AN03002
Legs R/L Middle - LG-HOGIRE-OPK02
Legs R/L Lower - LLS01-TELLUS-A
if any of the names are wrong, sorry >.> I'm looking at a tiny, terrible screen 20 feet away <.<
40 in En. Output, 50 in KP Output.
15 in Aim Precision(does this affect blades? if not, put add them to the above)
20 each in Rectification for each part
15 in each Quick Boost
20 in each Stability.
yes, I only have 290 FRS right now. haven't finished the game yet >.>
Paint:
Head/Arms/Legs/Stabilizers:
255/255/255
0/0/80
0/155/255
120/120/120
120/120/120
255/255/255
EYE:0/155/255
Moonlight/Core:
0/0/130
255/255/255
0/155/255
0/0/0
255/255/255
0/155/255
Back Boosters:
0/0/130
0/0/0
255/255/255
120/120/120
guess that's it.
RE: Abalone - a blader - Lord_Leperman - 12-30-2008
This will make a pretty powerful blader in 1.2 because of the back boosters and the legs. While I can't comment on the frame parts, as I haven't really maximized the choices as of yet, I can help you with the tunes.
The key is to maximize the strength of your design by re-assigning your tunes to areas important for a blader, namely the EN output, turn rate, and quickboost.
I suggest maximizing the tune points for the SOBRERO generator on output. Even an extra 10 FRS memory points can go a long way in a fight, as every bit of energy is needed for movement and attacking for this design. I'm not too sure about Aim Precision, so I think I'll leave it empty. Try maximizing your turn rate for the design as well to make it easier to re-aquire your targets without having to wast energy on QB-ing, as you'll need it for a blade swipe or a strafe QB. The LAHIRE's turn rate helps, as it already has high numbers for the stat. Try maximizing QB as well to cover more distances and to increase your blade lunge range, if you'd notice, your blade lunge increases if you activate and hold your blade in the middle of a QB. I think its actually okay for a blader design, though I can't say much as I'm not really a blader to begin with. Try asking for other opinions if ever you get the opportunity.
RE: Abalone - a blader - Supplice - 09-28-2009
Nice. You can change out the LAHIRE legs for other things, but I guess the setup will do fine. The FRS points were wasted on Aim Precision, cauz' we all know aming is for the sniper rifles. Try beating more missions on HARD mode for more FRS points. You could use the OMER boost parts(the extra side boost and extra boosters) to increase the base speed. Other than those complaints, pratice!