The Raven Republic Forums
Figures/Model Kits - Printable Version

+- The Raven Republic Forums (https://ravenrepublic.net/forums)
+-- Forum: Creative Works (https://ravenrepublic.net/forums/forumdisplay.php?fid=60)
+--- Forum: Destructive/Delicious Designs (https://ravenrepublic.net/forums/forumdisplay.php?fid=75)
+--- Thread: Figures/Model Kits (/showthread.php?tid=2716)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74

RE: Figures/Model Kits - Fox - 08-27-2018

Aaand finished. Base kit is an HGBF Leopard Da Vinci with parts from a Verde Buster and a Striker GN-X.

[Image: 29364703707_18f9b18332_c.jpg]


Now on to the next project!

RE: Figures/Model Kits - Serene - 09-01-2018

Bagay actually yung paa :3

RE: Figures/Model Kits - Fox - 09-03-2018

(09-01-2018, 05:02 PM)Serene Wrote: Bagay actually yung paa :3

Thanks for the donation. Big grin

RE: Figures/Model Kits - Fox - 01-04-2019

2018 was a pretty productive year for me. Met some new hobbyist friends who inspired me to do better on my projects. This is a list of the mechs that i've managed to churn out during the year.


March 2018
kitbashed 1/144 HGUC Vervain
[Image: 44752762720_6fa98c7a38_c.jpg]


April 2018
customer colored 1/144 HGUC Gelgoog with scratchbuilt backpack
[Image: 44752762400_ceda8bc43a_c.jpg]


May 2018
customer colored 1/144 HGBF A-Z Gundam
[Image: 44752762030_7f49e9cf15_c.jpg]


June 2018
resin conversion kit 1/144 NG Tallgeese II to Leo
[Image: 44752759460_e70ddcb873_c.jpg]


August 2018
kitbashed 1/144 HGBF Leopard Buster
[Image: 46518451632_93d3874187_c.jpg]


September 2018
kitbashed 1/144 HGBF Gundam G3
[Image: 46570542191_da16765382_c.jpg]


October 2018
custom colored 1/144 HG00 Advanced GN-X
[Image: 44752756780_30f34db3f0_c.jpg]

1/144 HGUC Dom Tropen Unicorn ver.
[Image: 46570541461_55e56e35ab_c.jpg]


November 2018
custom colored 1/144 HGUC Efreet Varangr
[Image: 44752754390_1d83a3d065_c.jpg]


December 2018
custom colored 1/144 HGUC Nemo
[Image: 46518456422_3719b2cddf_c.jpg]

custom colored 1/144 HGTO Prototype Gouf
[Image: 44752763010_c5c3dcd024_c.jpg]


Looks like getting even just that cheap airbrush was a pretty good investment after all. Tongue

RE: Figures/Model Kits - J.E_Magog - 06-17-2019

Tsk tsk tsk... Committed Salute

RE: Figures/Model Kits - Fox - 06-27-2019

(06-17-2019, 11:14 PM)J.E_Magog Wrote: Tsk tsk tsk... Committed Salute

Nag-ubos ng mga idea na matagal nang gustong gawin eh. Hahaha.

RE: Figures/Model Kits - J.E_Magog - 08-10-2019

P-Bandai MG Heavyarms with Igel Unit. Nakakainis da talaga to bakit di nalang bigyan ng normal release Angry
https://p-bandai.com/sg/item/N2469603001001

RE: Figures/Model Kits - Fox - 08-19-2019

Been itching to work on any mech kit that's not exactly humanoid for a while now. I was playing Mechwarrior 4: Mercenaries a few months ago so a Timber Wolf seemed to be just the thing. Problem is, i haven't seen any Battletech kits at all in local stores for over a decade and a half already. Overseas online stores will drain my wallet if i go for the out-of-print,rare and overpriced Armorcast kits so the only resort i had left was to have one 3D-printed.

[Image: 48574200641_a24ab037cb_o.jpg]

Huge. Taller even than most of my MG kits.

RE: Figures/Model Kits - J.E_Magog - 08-19-2019

The resolution looks good on that print! Sa tingin mo pwede na ang material na yan for the 1/72 AC parts? Kung may access ka sa 3d printing I can share some of the CAD models I am working on in .stl format.

RE: Figures/Model Kits - zero_kanipan - 08-20-2019

(08-19-2019, 11:01 PM)J.E_Magog Wrote: The resolution looks good on that print! Sa tingin mo pwede na ang material na yan for the 1/72 AC parts? Kung may access ka sa 3d printing I can share some of the CAD models I am working on in .stl format.

Roninfang here on the boards accepts 3d printing commissions.

RE: Figures/Model Kits - Fox - 08-20-2019

(08-19-2019, 11:01 PM)J.E_Magog Wrote: The resolution looks good on that print! Sa tingin mo pwede na ang material na yan for the 1/72 AC parts? Kung may access ka sa 3d printing I can share some of the CAD models I am working on in .stl format.

I'd say they're good enough. I shopped around for print shops who did really good work. Had it done by this shop based in Bulacan then just scheduled a meet-up for the finished product. Was pretty cheap too.

Sure. You still got the files for some of those PS2-era parts? ☺

RE: Figures/Model Kits - RoninFang - 08-20-2019

dang na 3d print na pala XD sayang meron pala sa inyo nag hahanap ng 3d printing service
meron kasi ako 3d printing service dito : p

RE: Figures/Model Kits - J.E_Magog - 08-21-2019

(08-20-2019, 06:56 PM)Fox Wrote: I'd say they're good enough. I shopped around for print shops who did really good work. Had it done by this shop based in Bulacan then just scheduled a meet-up for the finished product. Was pretty cheap too.

Sure. You still got the files for some of those PS2-era parts? ☺

Gonna have to sift through some of my files from 2014. Do the models need to be arranged in a particular manner? The models I have are currently laid out like this since it was printed in SLA.

[Image: 48589075026_26b5026c70_z.jpg]


RE: Figures/Model Kits - RoninFang - 08-22-2019

doesnt need to be laid out like that naman but if naka arrange na siya makes it easier to 3d print

also FDM type 3d printer ko

RE: Figures/Model Kits - Fox - 08-22-2019

(08-21-2019, 10:42 AM)J.E_Magog Wrote: Gonna have to sift through some of my files from 2014. Do the models need to be arranged in a particular manner? The models I have are currently laid out like this since it was printed in SLA.

[Image: 48589075026_26b5026c70_z.jpg]

Lemme know if you find any. Hahaha. Not really that much of a priority nowadays kasi iniwan ko yung mga AC kits ko sa Maynila nung pinauwi ako ng Ilocos. I just took painting equipment and pretty much lahat ng mga HGUC ko for company. Hahaha.