Armored Core Figures/Model Kits - Printable Version +- The Raven Republic Forums (https://ravenrepublic.net/forums) +-- Forum: Creative Works (https://ravenrepublic.net/forums/forumdisplay.php?fid=60) +--- Forum: Destructive/Delicious Designs (https://ravenrepublic.net/forums/forumdisplay.php?fid=75) +--- Thread: Armored Core Figures/Model Kits (/showthread.php?tid=183) |
RE: Armored Core figures/model kits - Fox - 12-24-2009 Original release or converted with some parts from the NG 1/100 version maybe? RE: Armored Core figures/model kits - Serene - 12-25-2009 Woah.... That Longbow's waaay too sweet. RE: Armored Core figures/model kits - isburai - 12-31-2009 MG GN-X wow... RE: Armored Core figures/model kits - Fox - 01-05-2010 My prayers have been answered. I've been hoping for an HGUC release of the F2 type for years now. Thanks to Immaterial for the heads-up. RE: Armored Core figures/model kits - isburai - 01-09-2010 MG Exia Ignition Mode: Trans-AM mode. RE: Armored Core figures/model kits - Mjting - 01-09-2010 hm....this or the normal ignition? hmmmmm....guys helpe me out, ignition exia has been a part of my "must get" list Altho i dont see an alternate frame mode (like the exia repair of the original) but since you guys know that i LOVE red. i might still go for this lololol RE: Armored Core figures/model kits - cabs - 01-09-2010 (01-09-2010, 09:39 AM)arch_angel Wrote: hm....this or the normal ignition? hmmmmm....guys helpe me out, ignition exia has been a part of my "must get" list i prefer the normal one. Normally for special metallic editions like this one, the gate connector's color is left out (the connecting points with the frame). It's hard to reproduce the same color to patch it out unless u have an air spray at your disposal. RE: Armored Core figures/model kits - Fox - 01-10-2010 One way that a lot of modellers deal with metallic-finished kits is to strip the metallic coating off the parts themselves by soaking them in some turpentine diluted with water and then spraying their own metallic paint over the bare plastic afterwards. A good example would be the various incarnations of the Hyaku-Shiki and the Akatsuki, since a lot of plamo enthusiasts find the gold paint to be a bit too shiny. Or you could just buy a regular Ignition Exia and have someone customize it for you. All it needs is a substitute of the LEDs in the GN Drive and a different paintjob RE: Armored Core figures/model kits - isburai - 01-17-2010 AC - Tellus Gunmetal ver. and AC - Aaliyah Unsung now available at wasabi toys. tamang tama, kakasweldo lang. haha! RE: Armored Core figures/model kits - cabs - 01-17-2010 HOGIRE also has one of those, both were released last december IIRC. RE: Armored Core figures/model kits - Black Dragon - 01-26-2010 http://wasabitoys.com/product.asp?productcode=4800 http://wasabitoys.com/product.asp?productcode=4932 Hmm, maybe we should get one of those (after buying a Saber model or something lol) RE: Armored Core figures/model kits - Grim - 01-26-2010 Honest to God, that Lahire model is one of the sexiest designs I've seen in a while. That and White Glint. RE: Armored Core figures/model kits - Fox - 01-26-2010 Ayos ang timing ng labas ng mga to, sakto lang kung kelan ako nagka-trabaho ulit. RE: Armored Core figures/model kits - isburai - 02-04-2010 Armored Core: White Glint & VOB Set (Movie Color Ver.) very nice. mas maganda kesa sa normal ver. at mukang may decals pa. RE: Armored Core figures/model kits - Fox - 02-04-2010 What the hell? It's even more expensive than the earlier version. |